Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
Page 4
advance to the next setting.
6.
Day
. Press the [+] or [-] key to increase or decrease the day. Press the
SET
key to advance
to the next setting.
7.
Year
. Press the [+] or [-] key to increase or decrease the year. Press the
SET
key to advance
to the next setting.
8.
Temperature Units of Measure
. Press the [+] or [-] key to switch between °F and °C units of
measure. Press the
SET
key to advance to the next setting.
9.
Max/Min Clearing
. The Max/Min can be programmed to clear daily (at midnight) or
manually. Press the [+] or [-] key to switch between “Clears Daily” and Clears Manually.
Press the
SET
key to exit setting.
5.2 Day Month/Year/Seconds Display
Press the
SET
key (do not hold) to toggle between the Day/Month, Year and Seconds.
5.3 Alarm Mode
The WS-28 includes time alarm, indoor and outdoor temperature alarm.
When an alarm condition is exceeded, the alarm icon will flash
(visual) and the alarm beeper will
sound (audible). To silence the beeper, press any key.
To view the current alarm settings, press the
Clear/-
button to enter the alarm mode.
5.3.1 Alarm Defaults
Channel Default
Condition
Max ALARM (temperature) ºF Min ALARM (temperature) ºF
Indoor
OFF
68
32
Outdoor
OFF
86
14
5.3.2 Setting the Alarms
In alarm mode, press and hold the
SET
key for three seconds. The alarm parameter will begin flashing.
To adjust the alarm parameter, press the [+] or [-] key to increase or decrease the alarm setting slowly,
or press and hold the [+] or [-] key for three seconds to increase or decrease the alarm setting rapidly.
Press the
SET
key for three seconds to turn on (the alarm icon will appear
) and off the alarm.
To save the alarm setting and proceed to the next alarm parameter, press (do not hold) the
SET
key.
The following is a list of the individual alarm parameters that are set (in order):
1.
Alarm hour
2.
Alarm minute
3.
Indoor temperature Max alarm
4.
Indoor temperature Min alarm
5.
Outdoor temperature Max alarm
6.
Outdoor temperature Min alarm
Once the alarm setting completed, press the
Clear/-
button, or wait 15 seconds for timeout to
return to normal mode.
