Version 2.12
©Copyright 2020, Ambient LLC. All Rights Reserved.
Page 56
1.
Re-register Transmitter Indoor.
Re-synchronizes the wireless signal from the indoor
thermo-hygrometer-barometer. Press
to highlight this field.
Press
or
key to select re-register indoor transmitter. Press
or
key to popup the
Message Box” Are
you sure you want to register the new indoor
transmitter?” Press
or
to select Yes or No. Press the
key or
key
to confirm the selection.
2.
Re-register Transmitter Outdoor.
Re-synchronizes the wireless signal from the outdoor
sensor array. Press
to highlight this field.
Press
or
key to select re-register indoor transmitter. Press
or
key to popup the
Message Box” Are
you sure you want to register the new outdoor
transmitter?”
Press
or
to select Yes or No. Press the
or
key
to confirm the selection.
3.
Clear History.
Clears all the historical data in archive memory. Press
to highlight this
field.
Press
or
key to select re-register indoor transmitter. Press
or
key to popup the
Message Box” Are
you sure you want to clear history?” Press
or
to select Yes or No. Press
or
key to confirm the selection.
4.
Automatic Clear Max/Min.
Clears all the minimum and maximum values in stored memory
at Midnight every day. Press
to highlight this field.
Press
to switch between automatic clear manually (OFF) or automatic clear daily
(ON).
5.
Reset to Factory.
Clears all stored memory, calibrations and other variables to factory default.
Press
to highlight this field.
Press
to proceed. Press
or
key to popup the
Message Box” Are
you