Version 1.0
©Copyright 2011, Ambient LLC. All Rights Reserved.
Page 2
1.
Introduction
Thank you for your purchase of the Ambient Weather WS-1175 Weather Station with time, indoor
temperature and humidity, outdoor temperature and outdoor humidity, barometer and weather
forecasting. The following user guide provides step by step instructions for installation, operation and
troubleshooting. To download the latest manual and additional troubleshooting tips, please visit:
http://ambientweather.wikispaces.com/ws1175
2.
Getting Started
The WS-1175 weather station consists of a display console (receiver), and a wireless thermometer
(remote transmitter).
2.1 Parts List
QTY
Item
1
Display Console
Frame Dimensions (LxWxH): 7.0 x 4.0 x 1.0 in
LCD Dimensions (LxW): 4.25 x 2.5”
1
Thermo-hygrometer transmitter (WH5) with mounting bracket
Dimensions (LxWxH): 4.5” x 1.25” x 0.5”
1
User Manual
2.2 Recommend Tools
Philips screwdriver (precision)
Drill for mounting bracket
2.3 Remote Thermometer Sensor Set Up
Note:
To avoid permanent damage, please take note of the battery polarity before inserting the
batteries.
Remove the battery door on the back of the sensor with a Philips screwdriver (there is only one screw,
in the middle of the unit). Insert two AAA batteries as shown in
Error! Reference source not found.
(we recommend lithium batteries for cold weather climates, but alkaline batteries are sufficient for
most climates).
Replace the battery door and set screw. Note that the temperature and humidity will be displayed on
the LCD display. Looking at the back of the unit from top to bottom, the polarity is (+) (-) for the left
battery and (-) (+) for the right battery.