5
2.
Connect the rain gauge with long set screw. Tighten with precision screwdriver, as shown in Figure 2.
Note:
There may be a slight “play” in the rain gauge and the screw may not be flush. Do not force
the screw.
Note:
There are two mounting holes on the side of the rain gauge in the event you wish to mount the
rain gauge in a different location than the mounting arm.
Figure 2
3.
Connect the thermo-hygrometer with short bolt and nut. Tighten with precision screwdriver, as shown in
Figure 3. Slide the radiation shield over the thermo-hygrometer after connecting the cables from the
wind speed sensor and rain gauge (Step 7). Attach to the thermo-hygrometer mounting arm to the
upper mounting pole.
Figure 3
4.
Connect the wind speed cable to the thermo-hygrometer jack (reference the label on the
thermo-hygrometer). Connect the rain gauge cable to the thermo-hygrometer jack (reference the label on
the thermo-hygrometer).
