Version 1.2
©Copyright 2018, Ambient LLC. All Rights Reserved.
Page 5
3.1
Mounting with Zip Tie
Mounting the sensor with a zip tie will result in better accuracy when mounting outside, since it is not
touching another object. Other objects will store and radiate heat (or cold).
Figure 4
3.2
Mounting with Nail or Screw
To mount the sensor with a nail or screw, the cap must be less than or equal to 5.0 mm in diameter.
Figure 5
4
Console Operation
Note:
The console has two buttons for easy operation:
°C / °F
button (on the left), and
High /
Low Record
button (on the right).
4.1
Temperature Units of Measure
To change the temperature units of measure, press the
C / °F
button (on the left).
4.2
High Low Record
The indoor temperature, indoor humidity, and outdoor temperature can be reset every 24 hours (based
on when the batteries are inserted), or never.
Press the
High / Low Record
button (on the right) to switch between reset 24 hours or never.
To reset the highs and lows, remove and reinsert the battery inside the console. If Reset 24 hour option
