Ambient Weather WS-02 User Manual Download Page 3

 

Version 1.0  

 

 

©Copyright 2012, Ambient LLC. All Rights Reserved. 

 

 

 

Page 3 

Term 

Definition 

Accuracy 

Accuracy is defined as the ability of a measurement to match the actual 
value of the quantity being measured. 

Range 

Range is defined as the amount or extent a value can be measured. 

4.

 

Specifications 

4.1 Measurement Specifications 

The following table provides specifications for the measured parameters.   
 

Measurement 

Range 

Accuracy 

Resolution 

Indoor Temperature 

32 to 140 °F 

± 2 °F 

0.1 °F 

Outdoor Temperature 

-40 to 140 °F 

± 2 °F 

0.1 °F 

4.2 Power Consumption 

 

2 x AAA 1.5V Alkaline batteries 

 

Battery life:    Minimum 24 months for base station 

5.

 

Troubleshooting Guide 

If your question is not answered here, you can contact us as follows: 
 

1.

 

Email Support: 

[email protected]

 

2.

 

Live Chat Support: 

www.ambientweather.com/chat.html

 (M-F 8am to 4pm Arizona Time) 

3.

 

Technical Support: 480-283-1644 (M-F 8am to 4pm Arizona Time) 
 

Problem 

Solution 

Temperature sensor reads too high in the 
day time. 

Make sure the probed thermometer is mounted in a 
shaded area on the north facing wall. 

Indoor and Outdoor Temperature do not 
agree 

Allow up to 30 minutes for the sensors to stabilize due to 
signal filtering. The indoor and outdoor temperature 
sensors should agree within 4 °F (the sensor accuracy is 
± 2 °F) 

Display console contrast is weak 

Replace console batteries with a fresh set of batteries. 

6.

 

Liability Disclaimer 

Please help in the preservation of the environment and return used batteries to an authorized depot.   
The  electrical  and  electronic  wastes  contain  hazardous  substances.  Disposal  of  electronic  waste  in 
wild country and/or in unauthorized grounds strongly damages the environment. 
 
Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any 
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading 
take place. 
 
This product is designed for use in the home only as indication of weather conditions. This product is 
not to be used for medical purposes or for public information. 
 
The specifications of this product may change without prior notice. 
 
This product is not a toy. Keep out of the reach of children. 

Summary of Contents for WS-02

Page 1: ...e Ambient Weather WS 02 indoor and outdoor thermometer with probe The following user guide provides step by step instructions for installation operation and troubleshooting To download the latest manual and additional troubleshooting tips please visit http ambientweather wikispaces com ws02 2 Getting Started 2 1 Parts List QTY Item 1 Display Console Frame Dimensions LxWxH 3 5 x 2 5 x 0 75 in LCD D...

Page 2: ...ll segments are operating properly Replace the battery door and fold out the desk stand and place the console in the upright position Figure 1 2 3 Sensor Operation Verification Verify the indoor and outdoor probe temperature match closely The sensors should be within 4 F the accuracy is 2 F Allow a few minutes to stabilize 3 Glossary of Terms ...

Page 3: ... probed thermometer is mounted in a shaded area on the north facing wall Indoor and Outdoor Temperature do not agree Allow up to 30 minutes for the sensors to stabilize due to signal filtering The indoor and outdoor temperature sensors should agree within 4 F the sensor accuracy is 2 F Display console contrast is weak Replace console batteries with a fresh set of batteries 6 Liability Disclaimer P...

Page 4: ...uest as proof of purchase to Ambient LLC Your Ambient LLC warranty covers all defects in material and workmanship with the following specified exceptions 1 damage caused by accident unreasonable use or neglect lack of reasonable and necessary maintenance 2 damage resulting from failure to follow instructions contained in your owner s manual 3 damage resulting from the performance of repairs or alt...

Reviews: