Version 1.4
©Copyright 2015, Ambient LLC. All Rights Reserved.
Page 2
1.
Quick Start Guide
Pull the battery tab before operation.
It is recommended to fully charge the ADVENTURER2
before first use.
Fully charge the ADVENTURER2 before first use.
If the ADVENTURER2 does not operate after pulling the
battery tab or anytime during normal operation,
fully
charge and reset the ADVENTURER2 by inserting an open
ended paper clip into the reset hole.
Maintenance:
1.
Plug the
ADVENTURER2
into a power source
(computer USB or AC) until fully charged.
Disconnect after fully charged to extend the battery
life.
Do not leave plugged into the charger
indefinitely.
2.
Periodically charge the ADVENTURER2 every
few weeks.
This will extend the battery life and
provide a fully charged radio when an emergency
occurs. The solar collector will not fully charge the
battery.
3.
Remove, inspect and clean the radio battery
contacts every few months with a cloth. Inspect the
battery for corrosion or leakage.
4.
If the battery light rapidly flashes red and green, it is
time to replace the battery.
