Version 1.0
©Copyright 2020, Ambient LLC. All Rights Reserved.
Page 4
Figure 3
5.
Insert two AA batteries.
6.
Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on
the display, as shown in Figure 4.
Figure 4
(1)
temperature units (°F vs. °C)
(2)
temperature
(3)
channel number
7.
Close the battery door.
8.
Repeat for the additional remote transmitters, verifying each remote is on a different channel.
5.
Sensor Placement
To mount or hang the sensor:
•
Use a screw or nail to affix the remote sensor to the wall, as shown in Figure 5 (a) or
•
Hang the sensor using a string or zip tie, as shown in Figure 5 (b).
