Version 1.10
©Copyright 2016, Ambient LLC. All Rights Reserved.
Page 5
The following table summarizes the USB version for most weather stations:
Weather Station
USB
Ambient Weather (WS-1080, WS-1090, WS-2080)
1.X
Davis Instruments VantagePro, VantagePro2 and VantageVue 6510USB and
6520 WeatherLink Data Logger
1.X
Fine Offset WH-1080, WH-2080, WH-3080
1.X
Honeywell / Meade TE923, TE827, TE821, DV928, Hideki, Mebus, IROX
1.X
La Crosse/ELV: WS-2300 Series, WS-300-PC, WS-300-PC-2, WS-300-PC-US,
WS-444, WS-500 , WS-550-Technoline, WS-550-US, WS-550-2-US, WS-777,
WS-888, WDE1
1.X
Oregon Scientific WMR-88, WMR-100, WMR-200, WMRS-200
1.X
Peet Bros: Ultimeter 100/800/2000/2100/II (requires USB to Serial
Converter)
Check
your
device
Rainwise MKIII Series, serial data logger
(requires USB to Serial Converter)
Check
your
device
USB to Serial converters
Check
your
device
Use USB Hub for 1.X. No USB hub required for 2.0.
2.
Connect the WeatherBridge to your router or switch.
Note: a cabled connection is required to configure the device. It can later be disconnected
after the optional WiFi LAN is configured.
3.
Connect the AC power adaptor to the WeatherBridge. The power light will turn ON
(reference
Figure 4
).
The Status/Reset light will flash slowly, then rapidly, then solid green. This process can take
several minutes. Once the status/reset light is solid green, you are ready to begin.
If it does not turn green, and continues to flash rapidly, it has not made a connection to the
Internet. Check your connections and firewall settings.
Figure 4
Status Lights
Note:
If you have a Davis Instruments WeatherLinkIP 6555 data logger, reference Section
