Version 1.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
Page 10
NiMH
A nickel–metal hydride battery, abbreviated NiMH or
Ni–MH, is a type of rechargeable battery. Its chemical
reactions are somewhat similar to the largely obsolete
nickel–cadmium cell (NiCd). NiMH use positive
electrodes of nickel oxyhydroxide (NiOOH), like the
NiCd, but the negative electrodes use a
hydrogen-absorbing alloy instead of cadmium, being in
essence a practical application of nickel–hydrogen
battery chemistry. A NiMH battery can have two to three
times the capacity of an equivalent size NiCd, and their
energy density approaches that of a lithium-ion cell.
null
No logical value. Can also mean zero or open circuit
(infinity)
10
Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1.
Email Support:
2.
Technical Support: 480-346-3380 (M-F 8am to 3pm Arizona Time)
Problem
Solution
Battery voltage always reads “null”
The battery is defective or installed incorrectly.
Immediately remove and inspect the battery polarity.
Discard the battery if defective.
Battery is excessively hot to the touch.
The battery is defective or installed incorrectly.
Immediately remove and inspect the battery polarity.
Discard the battery if defective.
11
Liability Disclaimer
Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading
take place.
This product is not to be used for medical purposes or public information.
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written authorization of the manufacturer.
Ambient, LLC WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL,
PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR
MALFUNCTION OF THIS PRODUCT.
12
FCC Statement
Statement according to FCC part 15.19:
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful interference.
