15
www.ambient.de
SYS>CONFIG>Lemo/ACN
Select the function of the USB connection:
MTC: this is the default, will be recognized as generic
MIDI interface and deliver or receive time code as
MIDI time code.
COM: select to communicate with computer, for updating software or transferring ACN data. This
mode will appear as a HID in the control panel.
Select by toggling the config switch left/right. Push in to select mode.
SYS > CONFIG>BAT
Select battery type for correct voltage readout and low
battery warning / flashing.
Li = Lithium-Ion (non-rechargeable batteries!) 1,5V, Alk = alkaline batteries 1,5V, NiMH = Nickel-
Metal-Hydrid rechargeable batteries 1.2 V
SYS > INFO
Select INFO to display information about the ACN-TL:
Serial Number
Main firmware version
Mac address
SYS > Factory Reset
This restores factory defaults: Sync is off, TC is 25 fps,
ACN is off, display brightness at 3, display auto-off 30
sec., TC-offset reset, USB to MTC.
Time code is not lost, battery type not changed, tune
value unaltered.
