WL22-AP Quick Installation Guide v.1.1 Page 2
4. Follow the setup wizard to complete the installation process.
Note:
Although the screens on your system may look different than those shown in these
instructions, you should be prompted for the same information. If you are not prompted for the
same information, refer to your Microsoft documentation.
Configuring the Access Point
1. Double-click on the
22M AP Utility
icon on your desktop.
2. Click
Refresh
and the following
Link Information
window will appear. You will see a list of
available AP(s) on the network. Select one AP and click
Apply
.
3. The following
Login Management
window will appear for you to log in. The default for
both the username and password is “admin”.
