Cleaning and maintenance
38
Cleaning and maintenance
WARNING!
Risk of electric shock!
There is a risk of electric shock due to live parts.
− Switch the microwave oven off and disconnect the plug from
the mains outlet before cleaning.
Failure to clean the appliance properly can damage the surfaces which can in turn
reduce the service life of the appliance and may lead to dangerous situations.
Therefore, clean the microwave regularly and remove all food residues.
− Switch the microwave oven off and disconnect the plug from the earthed mains
outlet before cleaning.
− Keep the interior of the microwave clean. Wipe away splashes or spilled liquids
that stick to the inner walls of the cooking area
1
with a damp cloth. A mild
cleaning solution can be used for serious dirt. Do not use cleaning sprays or other
caustic detergents as these could corrode, scratch or dull the door surface.
− The external surfaces should be cleaned with a damp cloth. In order to prevent
damage to the microwave’s internal operating parts, avoid allowing water to
penetrate into the ventilation openings.
− Clean the door, the viewing window as well as the closing mechanism carefully
with a mild soap solution. Take great care not to damage these parts.
− Water may condense on the external surfaces if used in high humidity. If water
condenses on the internal or external surfaces, wipe it off with a soft cloth.
− The glass rotary plate
6
must be removed occasionally for cleaning. Wash the
glass rotary plate in warm water with a mild soap solution or in the dishwasher.
Then dry the glass rotary plate thoroughly with a soft cloth.
− Rinse the grill rack in warm water with a mild soap solution. Allow some time for
stubborn dirt to soak.
− Wipe the drive shaft and the roller ring
7
with a damp cloth.
− Wipe out the cooking area with a damp cloth and a mild cleaning solution.
− Lingering odours in the microwave can be removed by placing a glass of water
with the juice and rind of a lemon into a deep container that is suitable for
microwave use and heating for 5 minutes. Wipe out thoroughly and dry with a
soft cloth.
− If you have to replace the light in the microwave, please contact a qualifi ed
specialist workshop or the Service Centre.
Summary of Contents for MD 18637
