5
SET UP PROCEDURE
(1.) Set up cable connection when using a LCD/CRT monitor
(In this section you will
see TV pictures after finishing the installation)
a. Connect the coaxial CATV cable from the wall into the RF input (
“CABLE IN” port
) in the back
panel of TV tuner module.
b. Connect the VGA cable from the VGA output(
“MONITOR” port)
in the back panel of TV tuner
module to your VGA monitor or LCD TV monitor.
c. Run the 3.5mm audio cable from your multimedia speaker or stereo system to the audio output
(“SPEAKER” port
) from the back panel of TV tuner module.
d. Connect the AC/DC power adapter of the TV tuner and power on the cable TV tuner module
using the supplied remote control or the push button on the module.
e.
Set the TV tuner module at TV mode
by pressing the
“INPUT” button
from the remote
controller or from the front control panel on the module unit itself.
The “INPUT” button will
lead you to the desired video input channel from Coax(TV), Composite Video, S-Video
and PC VGA Pass Through. The video channel selection goes by a loop, i.e. CATV
AV
SV
CATV…
f. If the TV video screen is displayed on the CRT/LCD TV monitor or projector when you set the
TV tuner module at TV mode. Congratulation! You have finished the installation.
*All brand names and trademarks stated or illustrated are related to their respect owners.
b.
.
c.
e.
d.
CRT or LCD
Speaker
Rear
AC/DC
Adaptor
Summary of Contents for LCDT6
Page 16: ...15 ...
