AMB2300 manual V2.3
13/16
Released: 28.01.2010
7 Regulatory compliance information
7.1 Important notice
The use of RF frequencies is limited by national regulations. The AMB2300 has been designed
to comply with the R&TTE directive 1999/5/EC of the European Union (EU).
The AMB2300 can be operated without notification and free of charge in the area of the
European Union.
Conformity assessment of the final product
The AMB2300 is a subassembly. It is designed to be embedded into other products (products
incorporating the AMB2300 are henceforward referred to as "final products").
It is the responsibility of the manufacturer of the final product to ensure that the final product is
in compliance with the essential requirements of the European Union's Radio &
Telecommunications Terminal Equipment (R&TTE) directive.
The conformity assessment of the subassembly AMB2300 carried out by AMBER wireless
GmbH does not replace the required conformity assessment of the final product in accordance
to the R&TTE directive!
Exemption clause
Relevant regulation requirements are subject to change. AMBER wireless GmbH does not
guarantee the accuracy of the before mentioned information. Directives, technical standards,
procedural descriptions and the like may be interpreted differently by the national authorities.
Equally, the national laws and restrictions may vary with the country. In case of doubt or
uncertainty, we recommend that you consult with the authorities or official certification
organizations of the relevant countries. AMBER wireless GmbH is exempt from any
responsibilities or liabilities related to regulatory compliance.