OPC1601 manual V1.9
page 3 of 10
9.6.2006
1 General
BlueNiceCom 3
Bluetooth-Modul with UART-interface and integrated Chip-antenna
•
Bluetooth Class 2 Modul
•
Serial Port Profile (SPP)
•
UART interface
•
Integrated chip-antenne
•
GAP & SDP support
AMBER wireless
provides with the BlueNiceCom 3 a Bluetooth-module with an integrated chip-
antenna, based on LMX9820A from National Semiconductor. This compact and inexpensive
Bluetooth-version is qualified for a serial data transmission.
BlueNiceCom 3 comes with a SPP profile (Serial Port Profile) and works with other Bluetooth
modules which support the same profile. Through the serial UART interface the BlueNiceCom
will be connected to a processor or a direct to a system, according to the application.
Via an external processor or host (PC) all further available application profiles could be set on
the SPP-profile, for example: Dial up Networking Profile, Fax Profile, LAN Access Profile.
The module has an integrated chip-antenna and can placed into a circuit like a SMD-part.
The controlling and setting is raised by a host processor. The module can be integrated easily in
a system. According to the application and the settings the BlueNiceCom II can be work as a
stand-alone-slave-module.
For a cable replacement or a point-to-multipoint (piconet) application a controlling through a
processor is necessary. Up to 3 slaves could be managed by a master module.
2 Technical data:
Voltage supply
2,85V to 3,6V
Current consumption
typ. 65 mA
RF output
typ. 2 dBm
Rx Sensitivity
typ. –82dBm
Datarate UART:
9,6 kbps to 921,6kbps
Interface
according to LMX9820A
Operating temperature
-30° bis +80°, optional an extended temperature range is possible
Dimension
27,5 x 16 x 3,5 mm
Miscellaneous
All further technical datas according to the LMX9820A Modul of
National Semiconductor
Downloaded from
Downloaded from
Downloaded from
