Physical specification
Dimensions
67,2 x 49,6 x 25 mm (L x W x H)
Weight
63 g
Operating environment
Operating temperature (without
battery)
-40 °C to +85 °C
Storage temperature (without battery) -40 °C to +85 °C
Operating humidity
5% to 95% non-condensing
Ingress Protection Rating
IP41
Battery charge temperature
0 °C to +45 °C
Battery discharge temperature
-20 °C to +60 °C
Battery storage temperature
-20 °C to +45 °C for 1 month
-20 °C to +35 °C for 6 months
Features
Sensors
Accelerometer
Scenarios
Green Driving, Over Speeding detection, Jamming
detection, GNSS Fuel Counter, Excessive Idling detection,
Unplug detection, Towing detection, Crash detection, Auto
Geofence, Manual Geofence, Trip
Sleep modes
GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep
Sleep
Configuration and firmware update
FOTA Web, FOTA, Amber Configurator (USB, Bluetooth),
FMBT mobile application (Configuration)
SMS
Configuration, Events, Debug
GPRS commands
Configuration, Debug
Time Synchronization
GPS, NITZ, NTP
Fuel monitoring
OBDII
Ignition detection
Accelerometer, External Power Voltage, Engine RPM
Safety information
This message contains information on how to operate AIT 450-LA safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read
these instructions carefully and follow them strictly before operating the device!
• The device uses SELV limited power source. The nominal voltage is +12 V DC. The
allowed voltage range is +10...+30 V DC.
• To avoid mechanical damage, it is advised to transport the device in an impact-proof
package. Before usage, the device should be placed so that its LED indicators are
visible. They show the status of device operation.
• Before mounting device make sure that a ≥3A fuse is present on OBD connector power supply.
• Before unmounting the device from vehicle, ignition MUST be OFF.
Do not disassemble the device. If the device is damaged, the power supply cables
are not isolated or the isolation is damaged, DO NOT touch the device before
unplugging the power supply.
All wireless data transferring devices produce interference that may affect other
devices which are placed nearby.
Summary of Contents for Amber Insight T450-Ia
Page 1: ......
