Note
• After the SIM card is inserted, the device powers on using the backup battery. If
the device fails to power on due to low battery, you can connect the device to the
OBD port of the vehicle to obtain power.
• The SIM card must be inserted correctly, has GPRS services activated, and is not
in arrears. If the SIM is identified and requires a PIN, please disable the PIN
request.
2.2. Installing the Device
Connecting the device to the vehicle:
-Find OBDII Connector in your vehicle (the following figure shows most of common OBD II
con-nector locations).
3. Quick SMS configuration
3.1. Default configuration settings
Movement and ignition detection:
Vehicle movement will be detected by accelerometer.
Ignition will be detected by vehicle power voltage between 9 - 36 V.
Device will send a alert notification to the server if one of these events happen:
Vehicle keeps moving at speeds above the threshold for a preset duration.
Driver steps on the brake or gas pedal hard, corners rapidly.
The device is plugged or unplugged from the OBDII connector.
