OPERATIONS
Front Panel Description
Display
Input Closures
Relay Output Closures
(no inputs closed)
(no output relays closed)
Enabled: This indicates whether the AMR-100-I will receive a
broadcast on
. This enables the AMR-100-I to receive a special broadcast or if there
is an emergency broadcast for the entire network. To receive these broadcasts, TMAP7 must
have an assigned audio port and the “*” must be visible on the screen. The status of TMAP7
can be seen with the other
when looking at the
from the
Closure Indicators: The small boxes at the top of the screen indicate a relay output closure or
input closure. The group of four boxes in the center display input closures and the group of
six boxes on the right display the output closures. A clear box means the input closure or
output relay is open. A black box means the input or relay is closed.
Audio Status Indicators: On power-up, there are two boxes under the relay indicators. They
are labeled St-1 and St-2. When clear, no audio is playing out the audio ports. When they
turn black, it means audio is coming out that port. The boxes split into two individual boxes
when two mono programs play out a port and they are labeled 1L and 1R or 2L and 2R.
Again, when clear, there is no audio and when black, there is audio.
Message Line: The last line on the display is black and it is the message window. Text
messages sent by the satellite uplink are displayed on this line.
Pressing any button will change the screen to display the
and
Rev. 1 – Firmware version 2.03
23
©
2012
Audio Status
(no audio playing)
Internet Connection
(connected to uplink
server)
Message Line
Emergency message
enabled
Ethernet Status
(Connected to internal
network)
Audio Status
Audio port 1 is playing
a mono program
out the left channel
and nothing out of
the right channel.
Audio Status
Audio port 2 is playing a
stereo program