Amb-OS Media AMR-100I, Operation Manual, Page: 39 / 52

*Time is the time (without seconds) and the date
*Zone is the time zone
*DST is whether Daylight Saving Time is in effect or not
GMT Time is the current
Greenwich Mean Time
Eastern Time is the current Eastern Time and it reflects DST.
Time Running is the amount of the time the receiver has been running
The “*” items can be changed and they can be done by the front panel (see Front Panel
section). They can also be changed through the Command Interface (see Command Interface
section below).
Audio Statistics
AUDIO STATISTICS
-------------------------------------
Playing Audio: NO
Audio IRQs: 73060454
Playing Audio reports whether audio is playing out a port.
Audio IRQs (Interrupt Requests) count the number of times the audio playback system
requested an interrupt from the process.
Target Mapping
TARGET MAPPING SETTINGS
-------------------------------------
TMAP1: Stereo 1 (T1)
TMAP2: Stereo 2 (T2)
TMAP3: Mono 1 Left (T1L)
TMAP4: Mono 1 Right (T1R)
TMAP5: Mono 2 Left (T2L)
TMAP6: Mono 2 Right (T2R)
TMAP7: Stereo 2 (T2)
TMAP7 Armed: No
Target Maps (TMAP) allow the AMR-100-I to use a different physical output for the same
name. Live streams can send a program to a TMAP number and the station can have the
program come out their port or target. TMAP7 is reserved for
emergency or ad hoc
broadcasts. For a description of the TMAP specification, see the TMAP Command under the
HTML Command Interface section.
Ethernet Statistics
ETHERNET STATISTICS
-------------------------------------
Connections: 1
IP Datagrams: 1918634
IP Fragments: 0
Connections show the number of units connected to the Ethernet port on the receiver.
IP Datagrams count the number of IP packets coming to the AMR-100-I.
IP Fragments are the number of packets that were incomplete in the network and
coming to the AMR-100-I
Rev. 1 – Firmware version 2.03 39
©
2012