30. Install the shot channel with the spring cotter pin
1
.
31. Establish the ISOBUS connection to the tractor.
32. Restart the implement.
CMS-I-00003814
9.1.28 Checking the wheel mark eradicator coulter
INTERVAL
Every 50 operating hours
or
Every 3 months
IMPORTANT
The tool carriers become worn when
constantly working in the soil.
When the wear limit of the wheel mark
eradicator coulter has been exceeded,
the tool carriers constantly work in the
soil horizon.
Replace the coulter when the wear limit
has been reached.
1.
If the distance
1
between the coulter tip and
the tool carrier is less than 15 mm,
replace the wheel mark eradicator coulter
2
.
2.
To replace the wheel mark eradicator coulter,
See section "Changing the wheel mark eradicator
coulter".
2
1
CMS-I-00001081
CMS-T-00002497-D.1
9 | Repairing the machine
Maintaining the machine
MG6967-EN-II | C.1 | 27.09.2021
211
