1.
To configure the shifted tramline,
see "ISOBUS software operating manual" >
"Configuring the tramline control".
2.
After configuring the shifted tramline,
check whether the desired coulters are shifted.
The large spacer elements
1
are 38 mm wide. The
small spacer elements
2
are 25.4 mm wide.
3.
To adjust the tramline width for the cultivating
implement,
add the desired spacer elements
or
remove the desired spacer elements.
CMS-I-00005546
6.4.24 Adjusting the filling auger
REQUIREMENTS
The implement is not coupled to the tractor
The implement is properly parked
CAUTION
Risk of tripping due to difficult access to
the filling auger
For safe access to the filling auger,
use a platform ladder.
1.
Fertiliser hopper is filled unevenly in the
direction of travel.
Loosen the bolt
2
.
2. Loosen the bolt
1
and remove it.
3. Move the outlet to the desired position.
4. Insert the bolt
1
and tighten it.
5. Tighten the bolt
2
.
CMS-I-00002029
CMS-T-00002217-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6967-EN-II | C.1 | 27.09.2021
143
