Amazone KG 6002-2, Original Operating Manual

Page: 70 / 118

6.7.6 Adjust the working depth of the side guide plates
The side guide plate ensures that the tilled soil is
not thrown to the side. The working depth can be
adjusted. The soil guiding angle bracket additionally
prevents free-flowing soil from escaping.
1. Take the universal operating tool from the parking
position.
2. Loosen the bolts
4
.
Work application Working depth
After the plough
Reduce the working depth
-
.
The side guide plates glide
through the soil at a depth of
1 to 2 cm.
For mulch seeding
with coarse organic
residues
Increase the working depth
+
. Crop residues can pass
underneath the side guide
plates. Install the side guide
plates higher at the front.
3. Move the side guide plates to the desired position
using the handle
1
.
4. Tighten the bolts
4
.
The soil guiding angle brackets may not work too
deep. The soil guiding angle brackets may only level
the soil ridge between the side guide plate and the
trailing roller.
5. Loosen the bolts
2
.
6. Move the soil guiding angle bracket
3
to the
desired position.
7. Tighten the bolts.
8. Make the same setting for the opposite side of the
implement.
9. After 5 hours of operation, check the bolt
connection for tight fit.
4
1
2
3
+
-
CMS-I-00002979
6.7.7 Adjusting the spring tension of the side guide plates
The swivelling side panel deflects upwards on
obstacles. The dead weight of the side panel and a
CMS-T-00004049-B.1
CMS-T-00004050-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6750-EN-II | C.1 | 21.07.2021 64