8.1.5 Driving the tractor away from the implement
Enough space must remain between the tractor and
implement so that the supply lines can be uncoupled
without obstructions.
1.
Drive the tractor away from the implement,
leaving a sufficient distance.
2.
Secure the tractor. Remove the ignition key.
CMS-I-00004118
8.1.6 Uncoupling the power supply for the lighting
1.
Secure the tractor and implement.
2.
Disconnect the plug
1
for the power supply.
3.
Wind up the cable and fasten it on the drawbar.
NOTE
When the implement is not used for longer
periods of time or is parked outdoors, we
also recommend disconnecting the cable on the
implement.
1
CMS-I-00001048
8.1.7 Disconnecting the hydraulic hose lines
1.
Secure the tractor and implement.
2.
Put the control lever on the tractor control unit in
float position.
3.
Disconnect the hydraulic hose lines
1
.
4.
Put the dust caps on the hydraulic sockets.
5.
Clean the hydraulic plugs.
1
2
CMS-I-00001045
CMS-T-00005905-A.1
CMS-T-00001705-A.1
CMS-T-00001706-A.1
8 | Parking the machine
Parking the implement after operation
MG6212-EN-II | C.1 | 12.04.2021
111
