7.2.5 Emptying the grass collector with electro-hydraulic controls
7.2.5.1 Emptying the grass collector close to the ground
1.
Switch off the PTO shaft drive.
2.
Drive the machine in reverse towards the
unloading point.
3.
To switch on the electro-hydraulic controls,
press the control button
1
.
Control via the remote control is active.
1
CMS-I-00003384
4.
To lift the grass collector,
press the button
1
at the top.
5.
Completely empty the grass collector.
6.
To lower the grass collector,
press the button
1
at the bottom.
7.
Completely lower the grass collector.
1
CMS-I-00003381
7.2.5.2 High tip emptying the grass collector
WARNING
Risk of tipping when the grass collector is
raised
Only raise the grass collector on stable
and level ground.
Never raise the grass collector on slopes
or inclines.
CMS-T-00004778-A.1
CMS-T-00004782-A.1
CMS-T-00004783-A.1
7 | Using the machine
Using the implement with electro-hydraulic controls
MG6212-EN-II | C.1 | 12.04.2021
106
