General safety instructions
12
GH HH
Super SMARTCUT BAF0009.3 05.17
2.6
User training
Only those people who have been trained and instructed may work
with/on the machine. The operator must clearly specify the responsi-
bilities of the people charged with operation, maintenance and repair
work.
People being trained may only work with/on the machine under the
supervision of an experienced person.
People
Activity
Person special-
ly trained for the
activity
1)
Trained person
2)
Person with specialist
training (specialist work-
shop)
3)
Loading/Transport
X
X
X
Commissioning
--
X
--
Set-up, tool installation
--
--
X
Operation
--
X
--
Maintenance
--
--
X
Troubleshooting and fault elimina-
tion
--
X
X
Disposal
X
--
--
Legend:
X.. permitted
--
..not permitted
1)
A person who can assume a specific task and who can carry out
this task for an appropriately qualified company.
2)
Instructed persons are those who have been instructed in their
assigned tasks and in the possible risks in the case of improper
behaviour, have been trained if necessary, and have been in-
formed about the necessary protective equipment and
measures.
3)
People with specialist technical training shall be considered as a
specialist. Due to their specialist training and their knowledge of
the appropriate regulations, they can evaluate the work with
which they have been charged and detect possible dangers.
Comment:
A qualification equivalent to specialist training can be obtained
through long term activity in the appropriate field of work.
Only a specialist workshop may carry out maintenance and repair
work on the machine, if such work is specifically designated "Work-
shop work". The personnel of a specialist workshop shall possess the
appropriate knowledge and suitable aids (tools, lifting and support
equipment) for carrying out the maintenance and repair work on the
machine in a way which is both appropriate and safe.
