7.5.4 Deactivating the levelling unit
If the levelling unit should not be used with soil tillage,
the levelling unit must be deactivated.
CMS-I-00007072
1.
Pull out the linch pins and pins on the two outer
holders of the levelling segments.
2.
Turn the levelling segments to the rear until one
of the holes
1
is aligned over the hole
2
.
3.
Secure the levelling segments with pins and linch
pins.
1111
2
CMS-I-00006931
7.6 Adjusting the trailing elements
1.
Take the setting lever
1
from the holder.
CMS-I-00002241
CMS-T-00010400-A.1
CMS-T-00002429-F.1
7 | Using the implement
Adjusting the trailing elements
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
70
