10. Pull the linch pin
4
out of the right-hand pin of
the double pin
3
.
11. Pull up the double pin and swivel in as many
spacer elements
1
on the piston rod
2
of the
running gear hydraulic cylinder as required for the
desired working depth.
12. Push the double pin all the way down again.
13. Secure the double pin on the right-hand pin again
with the linch pin.
14. Repeat steps 10 to 13 on the second running
gear hydraulic cylinder.
6.3.4 Preparing the implement for working with the roller
The implement can be used with or without the
roller. When working with the roller, the depth of
the implement is controlled via the support wheels
and the roller. Single rollers are parked with a roller
holder.
CMS-T-00009840-A.1
6 | Preparing the machine
Preparing the implement for operation
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
54
