Configuring implements
H
To be able to use the GPS switch functions, the fol-
lowing implements must be configured:
AMABUS implements
Implements that cannot communicate with the termi-
nal
Using the entered implement data, the AMATRON 3 can
control the connected implement.
The following implement data must be entered:
Implement name
Implement type
Geometry data
Part-width section data
ISOBUS implements sign in automatically and do not re-
quire configuration
Select Main menu >
"Implements"
.
006871
H | Configuring implements |
MG5560-EN-II
| B.1 | 2016.07
43
