TRON 3 functions can only be assigned to an external
input device if the AMATRON 3 has the ISOBUS-UT
number 1, see page 27. An example for such an exter-
nal input device is the AmaPilot
+
. If a button on the Ama-
Pilot
+
is assigned to a function on the implement, the
function can be actuated with the assigned button.
REQUIREMENTS
The AMATRON 3 is in ISOBUS mode, see
page 18
Select
"Setup"
>
"AUX-N assignment"
.
A list of available functions will be displayed.
Possible settings:
Define the AUX-N assignment using the functions list,
see page 34
Define the AUX-N assignment using the input list, see
page 35
2.1 Defining the AUX-N assignment using the functions list
For the AUX-N assignment using the functions list, all of
the available functions are listed on the left side. The
buttons of an external input device can be assigned to
these functions.
1.
If the functions are not listed on the left side:
Select
.
2. Select a function from the list.
007530
G | Configuring the setup | Defining the AUX-N assignment
MG5560-EN-II
| B.1 | 2016.07
34
