Operation of the machine
BAG0007.4 08.16
13
7
Operation of the machine
DANGER
•
When starting to operate the machine observe the opera-
tor's manual for the field sprayer.
•
When operating the machine observe the chapter "Safety
advice for the operator", page 5.
1. Prepare the spray cocktail as prescribed according to the in-
structions of the plant protective agent manufacturer and agitate.
2. Set the reversing taps on the control panel to spraying.
3. Read off the tractor meter the correct tractor gear for a forward
speed from 6 up to max. 8 km/h. Use the throttle hand lever for
setting the constant tractor engine rev. speed considering the
pump drive rev. speed (min 350 R.P.M: and max. 550 R.P.M.).
4. Switch on
AMASET
+
.
5. Lifting the sprayer boom until the transport securing device un-
locks via the tractor control valve
yellow
.
6. Folding down the sprayer boom via the tractor control valve
green
.
Beforehand actuate the selection switch if applicable.
7. Setting the spraying height via tractor control valve hose mark
yellow.
8.
Adjusting the boom tilting via the tractor control valve
natural
.
Beforehand actuate the selection switch if applicable.
9. Setting the spray rate via the spray pressure!
actuate
+
/
-
until the spray pressure indication shows
the required spray pressure according to the spray rate table.
10. Select the suited tractor gear and drive off
Maintain the selected tractor gear during the spraying operation.
