Amazone AMAPAD Operating Instructions Manual Download

Page: 174 / 237

Switching on the automatic steering

REQUIREMENTS

Vehicle with automatic steering is configured, see
page 71.

Suitable GPS receiver is configured (AGI-3 or
AGI-4), see page 51.

Automatic steering is enabled, see page 79.

Steering is calibrated, see page 166.

All of the conditions for the steering status are
fulfilled, see page 168.

Automatic steering coordinated, see page 170.

The vehicle is positioned on a track line.

In the operating menu, tap on

An alarm is issued.

The automatic steering has been started.

Button for starting the automatic steering turns

green:

NOTE

If the vehicle does not exhibit the desired driving
reaction, the automatic steering can be coordinated
again, see page 170.

4.1 Delayed automatic steering switch-on

The automatic steering can be switched on with a delay
to be able to accelerate the vehicle. When the required
speed has been reached, the automatic steering is
automatically switched on.

REQUIREMENTS

Vehicle speed below 2 km/h

1. Tap on

twice quickly.

flashes yellow-white.

2. Accelerate the vehicle.

005561

002540

M | Using automatic steering| Switching on the automatic steering

MG5574-

-II | B.1 | 25.10.2016

172

Summary of Contents for AMAPAD














































































































































































































































Search results

Summary of Contents for AMAPAD

Reviews:

Related manuals for AMAPAD

Brands by name

Popular brands

Amazone AMAPAD, Operating Instructions Manual

Search results

Summary of Contents for AMAPAD

Reviews:

Related manuals for AMAPAD

Brands by name

Popular brands