9
EN
1. Press the settings button
SET
(I) 3 times. The set battery mode
LO
/
NE
/
HI
flashes.
2. Press the buttons
+/–
(L) to toggle between different battery modes.
3. Press settings button
SET
(I) to confirm the setting.
The following tables explain the setting for 12 V and 24 V batteries.
The battery voltage is recognizes automatically.
12 V DC
Low mode
(LO)
Medium mode
(NE)
High mode
(HI)
Cut-off voltage
10.1 ±0.3 V
11.4 ±0.3 V
11.8 ±0.3 V
Restaring
voltage
11.1 ±0.3 V
12.2 ±0.3 V
12.6 ±0.3 V
24 V DC
Low mode
(LO)
Medium mode
(NE)
High mode
(HI)
Cut-off voltage
21.5 ±0.3 V
24.1 ±0.3 V
24.6 ±0.3 V
Restaring
voltage
23.0 ±0.3 V
25.3 ±0.3 V
26.2 ±0.3 V
Opening/closing
1. Opening: Open the lid (A) by pulling the latch.
2. Closing: Carefully close the lid (A) by holding it by the latch. The lid
must be level with the outer housing.
USB charging port
The USB charging port (M) provides 5 V and 500 mA.
1. Carefully take out the rubber cover.
2. Connect the USB device to the USB charging port (M).
3. After use, put the rubber cover back in place.
Emergency mode
In case of a malfunction of the control panel (B), set the emergency
switch (N) to
EMERGENCY OVERRIDE
position.
NOTICES
• In this mode no settings can be changed.
• The default settings are:
– Cooling temperature: 0 °F / –18 °C
– Vehicle battery protection: Low
• This mode is not intended for long-term use.
