25
24
Wi-Fi Protected Setup
Wi-Fi Protected Setup (WPS) section allows to connect to the Wi-Fi network’s access point by:
•
Pin Input Config (PIN)
Connection method, where a PIN code must be
entered at the network's access point.
•
Push Button Config (PBC)
Connection method, in which the user has to push
a button on both the access point and the wireless
client device. It works only for wireless networks
that have WPA Personal or WPA2 Personal
Security.
<2 min.
1.
2.
Software AP Connection
General Tab
The Wi-Fi adapter can also be used as a software AP. Click “Mode(M)” and then “Access Point”. It
can take up to few minutes to switch from the “Station” to the “Access Point” mode.
•
SSID
The SSID (up to 32 characters) is the unique name to identify an AP.
The default SSID of the AP is Full Computer Name plus “AP“.
•
BSSID
MAC address of the adapter.
•
Association table A list of all the wireless adapters connected to the software AP.
•
Config
Configuration of the software AP.
B071Y6Y83W-Amazonbasics-Wi-Fi 11n 300 Mbps USB Adapter-Detailed-V03.indb 24-25
17/10/2017 2:13 PM