8
EN
Intended Use
• This tester is intended to test the voltage at
insulated cables (non-contact) in the 12 V~ to
1000 V~ range.
• This tester may be used only under the
conditions and for the purposes for which it
was designed.
• This tester is intended to be used in dry indoor
areas only.
• No liability will be accepted for damages
resulting from improper use or non-compliance
with these instructions.
Operation
NOTICE
The tester is designed with high
sensitivity. Static electricity or other sources of
energy may randomly activate the sensor. This is
normal operation.
Switching the product on
Press the on/off button . The tester beeps once
and "Working" indicator is shown on the display.
The "Working" indicator flashes every 2 seconds as
the tester is performing a self-test. If a self-test fail,
the product beeps, the "Working" indicator flashes
5 times and then the products switches off.
