If you’re still encountering difficulties downloading the ASC-2400 App, please contact our
customer service department at www.amaxbrands.com or 1-866-360-1510
* Apple® devices require the use of iOS 10.0 or higher.
ANDROID™ devices require the use of OS 4.2.2 or higher.
INSTALLING YOUR PHONE HOLDER
Installing your phone holder is required to use your ASC-2400 drone’s camera. To install your phone holder,
turn your controller around to the back side with the battery compartment facing you and start by clicking
in the top “two teeth” into the two holes on the top of the controller and then proceed to click in the
bottom (see diagram S).
To remove, pull from the bottom first.
CAMERA VIDEO AND PHOTO STREAMING SETUP
Your ASC-2400 comes equipped with an on-board digital camera that takes both video and still photographs and
streams them to your mobile device.
WHAT YOU WILL NEED TO GET STARTED USING YOUR CAMERA
1. One Apple or Android Smart phone* (Phone not included).
2. The ASC-2400 App successfully downloaded and installed on your mobile device.
Note instructions on using the App are in the application tutorial
3.To Download the ASC-2400 App, scan the appropriate QR code below which will link to the App on either
the Android Play Store or Apple Store. If you are not able to scan the QR code, manually enter the web
address located under the appropriate QR code for your phone.
4. After the ASC-2400 App is installed, it should create an icon on your screen (see icon below). Click the
icon to run the App and make sure that it has installed correctly on your device. If not, please delete and
repeat the process again.
5. Follow the “TUTORIAL” for instructions on connecting/pairing your ASC-2400 drone to the App and using
the App for recording film and still photos.
S
finished
installation
9
10
a
b
Apple
®
iOS
Android OS
ICON
http://netopsun.com/asc_2000_series_apple
http://netopsun.com/asc_2000_series_google
2000 Series
