O P E R AT I O N S
PA G E 6
V S 8 1 I N S TA L L AT I O N & O P E R AT I O N M A N U A L
Before making any connections to the VS81, observe the
following:
> Ensure the mains voltage supply matches the label on the supplied
plug-pack (+/- 10%)
> Ensure that the power switch is OFF Ensure that all system grounds (earth)
are connected to a common point.
> Avoid powering equipment within a system from multiple power sources
that may be separated by large distances.
> Connect all video sources and destination equipment
> Power up all source and destination audio-visual sources
> Power up the VS81 video switcher
> Select the appropriate input source by using the front panel select
buttons or the supplied IR remote control
> Upon powering up the VS81 will return to it’s last used setting before
powerered down.
REMOTE CONTROL
The AMAV VS81 switcher ships with a remote control. The remote
control has the following functionality:
i) Source Select Buttons
Eight separate input source buttons are provided for the video output.
The last selected input source will be routed to the destination output.
ii) Power Button
Toggles the unit into, and out of, standby mode. In standby mode the
switcher will stop AV routing. Standby mode is indicated by the
illumination of the front panel power LED only
POWER
VS81
8 x 1 Switcher
5
6
7
8
1
2
3
4
VIDEO SELECT
i
i i
