X212AFD
July 2021
17
Amate Audio
Maximum Input Voltage without clipping: +20dBu (8Vrms)
IMPORTANT:
Please always use balanced microphone cable with the following pin
assignment:
1= Shield (Ground) 2= Live (+) 3= Return (-)
G) AC MAINS INPUT/LINK:
Mains supply connection via PowerCon.
•
Blue connector for AC in.
•
Grey connector to feed other units in parallel. Linking up to three units is possible,
provided that a quality cable of a minimum section of 3x2.5mm
2
is used.
Connecting more than three units in parallel may lead to a voltage drop in the
cable that will reduce the equipment performance.
Always use mains power cable supplied by manufacturer.
Never connect the Xcellence cabinets to an unearthed mains supply or by
using an unearthed mains cable.
5 CONNECTING
5.1 Parallel connection
5.1.1 Analog Audio Signal
Connect the signal (mixing desk output) to INPUT on the first unit. Use the LINK output
to transfer the INPUT signal to the second unit and thus sequentially for further units.
All of the units in this chain must be switched on.
Fig.10.
Parallel connection for the X212AFD (signal). You can link three units or more
