NITID S26P
Dec 2021
3
Amate Audio
1. INTRODUCTION
1.1. General
Amate Audio would like to thank you for your confidence in our NITID Series. We
suggest you to carefully read the following instructions in order to obtain the best
results in performance.
1.2. Features and presentation
S26P
Passive acoustic system
NL4MP Speakon input & parallel output
400 W program power
Sensitivity 1 W / 1 m: 95 dB
2 x 6" neodymium magnet woofers with 1.5” voice coil and fibre cone
1" titanium diaphragm neodymium magnet tweeter
8Ω and 16Ω available
2. CONNECTIONS
2.1. Connection description
A)
SPEAKON
: The S26P uses two NL4MP Speakon terminals
and are duly prepared for a perfect connection in a parallel system.
Terminal Pins +1/-1 must be always used, disregarding the +2/-2
which are not internally connected. Respect always the po/-.
Fig. 1.
NITID passive connectors
It is strongly recommended to use a two-conductor high quality wire, non-
shielded and two-coloured. We recommend using a minimum section of 4
mm
2
for each conductor. Avoid long wire distances as they induce to
important power and quality losses.
2.2. Configurations
2.2.1. Full-range stereo configuration
Connect each output of the amplifier LEFT/RIGHT to
each cabinet using two independent wires.
Fig. 2.
Full-range stereo configuration
A
A
