background image

8

73930

Fabric Care and

Maintenance

REGULAR CARE:

• Protect from direct sunlight

• Vacuum regularly using low suction
• Rotate reversible cushions regularly

CLEANING:

• Do not remove cushion covers for separate cleaning even though

they may have zippers

• Do not wash, Do not dry clean, Do not shampoo clean

• Clean with hot water extraction machine. Professional cleaning
recommended

• Do not use dishwashing liquid or laundry detergent

• Use only upholstery detergents

• Do not wet filling

• Dry in shade away from direct heat and sunlight

• Allow to dry thoroughly before re-use

SPOT CLEANING:

• Do not rub
• Do not spot clean with any solvent

• Treat spills and stains as soon as possible
• Gently scrape off any soil or mop any liquid from the surface of the

fabric

• Apply proprietary cleaning agents strictly according to instructions to
remove the residue of the spill

• 

Do not saturate the fabric or interior with water or other cleaning liquids

WARNING:

Apply only water-based soil resist (fabric protection) treatments. Do not

 

use aerosol products

PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT COVERED BY WARRANTY

* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND TEAR AND DOES NOT AFFECT THE
 DURABILITY OR FUNCTIONALITY OF THE FABRIC AND IS EASILY REMOVED
CAUTION:

ALWAYS LIFT YOUR BED WHEN MOVING/RELOCATING - DO NOT DRAG.

DRAGGING CAN CAUSE THE CENTRE SUPPORT LEGS TO BEND/BREAK .

Summary of Contents for TREASURE 73930









Reviews: