ITEM CODE 64476
5
Step 3: Inserting the legs
Insert the front legs (2) into the corresponding slots, they are
marked.
The front legs are interchangeable and do not
distinguish between left and right.
Then insert legs 3 and 4
into their designated slots, these are
not interchangeable.
Step 3: Affixing the bolts
Insert the pre-assembled bolts into the holes as shown above.
Turn and tighten with Allen key provided (D). On Each leg, start
by only fastening each bolt to half way. Once both bolts are in,
then tighten both. Bolts should be tightened until all the way in.
Large visible gaps between components is a sign of not be tight
enough. Also
do not over tighten
, if you hear cracking in the
wood, stop. Tighten by hand only. Repeat for the other 3 legs
