background image

-1-

When using this unit, basic safety precautions should always be 
followed, including the following:
1. Read and understand all instructions before using.
2. Close supervision is necessary when any fixture is used by or near 
children. Do not leave the fixture unattended while in use.
3. Care must be taken as burns can occur from touching hot surfaces.
4. Do not operate the fixture if a cord is damaged, or if the fixture has 
been dropped or damaged, until it has been examined by qualified 
service personnel.
5. Position any power cables such that they will not be tripped over, 
pulled, or put into contact with hot surfaces.
6. If an extension cord is necessary, a cord with an amperage rating at 
least equal to that of the fixture should be used. Cords rated for less 
amperage than the fixture may overheat.
7. Always unplug the lighting fixture from the electrical outlet before 
cleaning and servicing, or when not in use. Never yank the cord to 
remove the plug from the outlet.

Foreword

Thank you for purchasing "amaran" LED photography lights - amaran 
F22x.
Amaran F22x is amaran newly designed cost performance light fixture. 
Compact structure design, compact and light, excellent texture. 
Has a high performance level, such as high brightness, high color render-
ing index, can adjust the brightness, etc. It can be used with variety of 
lighting accessories to achieve lighting effects and enrich product usage 
patterns. So that the product to meet the needs of different occasions light 
control, easy to achieve professional level photography.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for F22x





















Reviews: