16
HARD- WIRE INSTALLATION
Turn off the appliance completely a
should service and repair this electr
If it is necessary to hard wire this ap
and wire the appliance directly to t
This appliance must be electrically
wired. In the absence of local cod
Canada or the current ANSI/NFPA 7
1.
Remove the cover plate from t
shown below. Unscrew and rem
2.
Attach the wiring to the junctio
neutral wire into "N" and the g
3.
Replace the steel plate and scre
ely and let cool before servicing. Only a qualified
lectric appliance.
is appliance, a qualified electrician must remove
ire the appliance directly to the household wiring .
ally connected and grounded in accordance wi
l codes, use the current CSA C22.1 CANADIAN
PA 70 NATIONAL ELECTRICAL CODE in the United
m the left side of the appliance by removing the
remove power cord.
ction block. Please make sure the live wire goes
he ground wire into "G".
screws.
ified technician
ualified electrician must remove the cord connection
e with local codes, if hard
IAN ELECTRICAL CODE in
ited States.
the two screws, as
oes into the "L", the