![background image](http://html1.mh-extra.com/html/amano/tcx-22/tcx-22_operation-manual_2918171018.webp)
Page 16
TCX-22 Amano
Cincinnati,
Inc.
Replacing the Ribbon
To Remove:
1. Remove
the
cover.
2. Pull the two white release
tabs upward and remove the
ribbon cassette.
To Insert:
1. If the print mechanism is down and a piece of paper cannot be
inserted, press the RESET button to move the carriage up. This will
make the ribbon installation easier.
2. Insert the ribbon cassette.
Be sure to mount the ribbon between
the printer head and ribbon guide as arrows illustrate
.
3. Turn the knob on the cassette clockwise one turn to take up any
slack in the ribbon.
4. Replace the cover and check the print quality to confirm that you
have installed the ribbon correctly.
Error Messages
Error Code
Cause
E1 Pr
Home sensor, motor carriage stuck
E2 Pr
Time sensor, carriage stuck
E3 Pr
Home sensor
E4 Pr
Carriage stuck
Er
General print error
dL
Daylight Saving Time Program
For error messages E1 through E4, turn off the power before checking to
see that the carriage is not stuck or jammed. Also, check to see that the
ribbon cables are in good condition. After clearing any jams, restore the
power and press the RESET button. Contact your Amano Cincinnati
representative for assistance.
The
dL
error message signifies that an attempt was made to get into the
Program mode during the Daylight Saving changeover one-hour lockout.
Wait one hour and you will be able to program the clock.
Summary of Contents for TCX-22
Page 1: ...AMANO TCX 22 Electronic Time Clock Operation Manual 1 6 n 63 f2 ...
Page 19: ......
Page 20: ......