AMANO Europe NV, Westerring 2, 3600 Genk, Belgium
Tel: +32 89 32 39 20, Fax: +32 89 30 69 47
C
onfiguration
G
uideline HT503
9
9
5.2.3
FXO Termination Settings
In this section you have to edit two values shown in the screenshot below.
5.2.4
Channel Dialing Configuration
In the Channel Dialing section we have to modify, if the device will wait for a dial
tone and if 1 or 2 stage dialing has to be used. This of course depends on the
telephone line or telephone system the port is connected to. The configuration you
find below is showing a typical configuration if the device is directly connected tot
he telephone line oft he provider. This usually does not require a pause before
dialing and 1 stage method can be applied which means that all digits required to
route the call is send in one go.