40
S E R V I C E ( C L E A N I N G A N D M A I N T E N A N C E )
E N
8
Service (Cleaning and
Maintenance)
A wizard on the screen of the milling machine
guides you through the necessary service steps.
8.1
Weekly service
The weekly service consists of the following steps:
_
Cleaning the interior, removing debris from the
nozzles
_
Cleaning the collet/Spindle maintenance
_
Cleaning the tank and replacing coolant/lubri-
cant (C/L)
8.2
Monthly service
The monthly service consists of the following
steps:
_
Cleaning the interior, removing debris from the
nozzles
_
Cleaning the collet/Spindle maintenance
_
Cleaning the tank and replacing coolant/lubri-
cant (C/L)
_
Machine calibration
The cleaning of the milling machine
includes the interior, the collet and the
tank.
▷
Carry out service as instructed by the
milling machine (weekly/monthly).
NOTE:
Possible damage to the milling machine!
Improper cleaning agents can damage the mill-
ing machine.
▷
Do not use compressed air, ultrasound or a
steam jet for the cleaning (except for clean-
ing of the collet).
▷
Clean the milling chamber with water only.
Do not use cleaning agents.
▷
Clean and dry the milling chamber prior to
downtimes lasting several hours.
