Amana W10212195A Installation Instructions Manual Download Page 4

4

Minimum Clearances

Check location where the dishwasher will be installed. The 
location must provide:

Easy access to water, electricity and drain.

Convenient access for loading and unloading dishes. Corner 
locations require 2" (5.1 cm) minimum clearance between the 
side of the dishwasher door and the wall or cabinet.

A minimum of 25

⁵⁄₈

" (65.1 cm) is required in front of the 

dishwasher to allow the door to open fully.

Square opening for proper orientation.

Cabinet front perpendicular to floor.

If the dishwasher will be left unused for a period of time or in a 
location where it may be subject to freezing, have it winterized 
by authorized service personnel.

Electrical Requirements

It is the customer's responsibility:

To contact a qualified electrical installer.

To assure that the electrical installation is adequate and in 
conformance with National Electrical Code, ANSI/NFPA 70 - 
latest edition, and all local codes and ordinances.

A. 2" (5.1 cm) minimum clearance 

for door opening

B. Dishwasher

C. Countertop
D. 25

⁵⁄₈

" (65.1 cm) minimum

A

B

C

D

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, 
fire, or electrical shock.

WARNING

■  

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a 
malfunction or breakdown, grounding will reduce the 
risk of electric shock by providing a path of least 
resistance for electric current. The dishwasher is 
equipped with a cord having an equipment-grounding 
conductor and a grounding plug. The plug must be 
plugged into an appropriate outlet that is installed and 
grounded in accordance with all local codes and 
ordinances.

WARNING:

 

Improper connection of the 

equipment-grounding conductor can result in a risk of 
electric shock. Check with a qualified electrician or 
service representative if you are in doubt whether the 
dishwasher is properly grounded. Do not modify the 
plug provided with the dishwasher; if it will not fit the 
outlet, have a proper outlet installed by a qualified 
electrician.

■  

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded 
metal, permanent wiring system, or an equipment-
grounding conductor must be run with the circuit 
conductors and connected to the equipment-
grounding terminal or lead on the dishwasher.

GROUNDING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Summary of Contents for W10212195A





































Reviews: