Amana W10175445A, Owner'S Manual

Page: 7 / 60

7
Installing Your Refrigerator
How to Remove and Install the Pullout Drawer
WARNING
!
To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator before
removing doors. After replacing doors, connect power.
CAUTION
!
To avoid possible injury, product, or property damage, you will need two people to perform the following instructions.
1
Pull drawer open to full
extension. Remove
Phillips screw from each
side of rail system.
2
Remove lower basket by
lifting basket from rail
system.
4
Lift top of door to
unhook door supports
from rail system. Lift
door out to remove.
1
Pull both rails out to full
extension.
Hook door supports
into rail tabs, as
illustrated, and
lower door into final
position.
2
3
Pull upper basket out to
full extension, and lift
out to remove.
3
With drawer pulled out to
full extension, insert lower
basket by aligning tabs
on both side of lower
basket with notches in
rail assembly.
4
Slide upper basket into
unit. Make sure that
rear of basket hooks
behind rail catch.
Removing Pullout Drawer Installing Pullout Drawer