9
Chiller Fresh
™
System
(some models)
Chiller Fresh
™
system features a drawer inside a sleeve.
Air circulates between drawer and sleeve. This systems
keeps food fresh longer and up to 5°F (3°C) colder than
Fresh Food temperature.
Chiller Fresh
™
control is located below front shelf trim.
Control adjusts amount of air circulating around drawer.
Slide control to
cold for normal Fresh Food temperature
and to
coldest for colder temperature. Ice crystals may
form on drawer or food on
coldest setting. Cold air can
decrease Fresh Food temperature. Fresh Food control
may need to be adjusted.
•
Remove drawer by lifting and pulling out. Remove
shelf by lifting front, releasing hooks from metal track
then pulling out.
•
Replace shelf by inserting hooks into metal track and
lowering front. Use slots 8 through 11 only. Replace
drawer by sliding in. Confirm boot is over air inlet in
side wall.
Garden Fresh
™
Crispers
Garden Fresh
™
crispers keep produce fresh longer. Wrap
produce tightly. Do not wash produce before placing in
crispers. Excess moisture could cause produce to spoil
prematurely. Do not line crispers with paper towels. Paper
towels will retain moisture.
Garden Fresh
™
control is located below front shelf trim.
Control adjusts humidity in crispers. Slide control to
high
for produce with leaves such as lettuce, spinach or
cabbage. Slide control to
low for produce with skins such
as cauliflower, corn or tomatoes.
Caution
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
Remove shelf and garden fresh crispers by completing the
following steps.
1.
Open crisper.
2.
Remove shelf by gently pushing up from underneath.
Tilt one end up then pull out.
3.
Remove crisper by lifting front while supporting
underneath then pulling out.
4.
Replace crispers and shelf by reversing steps 1-3.
Storage Rack
(some models)
Storage rack provides convenient storage for items such
as a large bottle, eggs, etc.
Depending on location of shelf, hang rack using 1 of the
following methods. Rack cannot be installed next to lower
Fresh Food section light bulb.
•
Remove shelf by lifting front, releasing hooks from
metal track then pulling out. Hang rack by inserting
tabs into slots on side of shelf. Replace shelf by
inserting hooks into metal track and lowering front.
•
Slide rack along side of shelf until tabs are inserted
into slots.
