Amana NTC3500FW0 Use And Care Manual Download Page 26

W10778944B

W10778945B - SP

®

/

TM

 © 2016. All rights reserved. Used under license in Canada.

®

/

TM

 © 2016. Tous droits réservés. Emploi sous licence au Canada.

 

 

02/16

Assistance or Service

Before calling for assistance or service, please check “Troubleshooting” or visit  www.amana.com/help. 

It may save you the cost of a service call. If you still need help, follow the instructions below. 

When calling, please know the purchase date and the complete model and serial number of your appliance.  

This information will help us to better respond to your request.

Amana Brand Appliances 

Customer eXperience Center 

553 Benson Road 

Benton Harbor, MI 49022-2692 

1-866-616-2664

Amana Brand Appliances 

Customer eXperience Centre 

Unit 200-6750 Century Ave 

Mississauga, Ontario L5N 0B7 

1-866-587-2002

You can write with any questions or concerns at:

Our consultants provide assistance with

Please include a daytime phone number in your correspondence.

If you need replacement parts or to order accessories

We recommend that you use only FSP

®

 Factory Specified Parts.  

These parts will fit right and work right because they are made with the same precision  

used to build every new AMANA

®

 

appliance. 

To locate FSP

®

 replacement parts or accessories go to www.amanapartsonline.com.

Questions? Call us toll free at 

1-866-616-2664 or in Canada call 1-866-587-2002.

In the U.S.A.

 

Features and specifications on our full line of appliances.

 

Installation information.

 

Specialized customer assistance (Spanish speaking, 

hearing impaired, limited vision, etc.).

In the U.S.A. and Canada

 

Use and maintenance procedures.

 

Accessory and repair parts sales.

 

Referrals to local dealers, repair parts distributors, 

and service companies. Whirlpool designated service 

technicians are trained to fulfill the product warranty and 

provide after-warranty service, anywhere in the United 

States and Canada.

Assistance ou Service

Avant de faire un appel pour obtenir de l’assistance ou un entretient, vérifier la section “Dépannage” ou consulter  

www.amana.com/help. Cette vérification peut vous faire économiser le coût d’une visite de réparation.  

Si vous avez encore besoin d’aide, suivre les instructions ci-dessous.

Lors d’un appel, garder à portée de main la date d’achat et les numéros de modèle et de série de votre appareil.  

Ces renseignements nous aideront à mieux répondre à votre demande.

Pour commander des pièces de rechange ou des accessoires

Pour commander des pièces de rechange, nous vous recommandons d’utiliser seulement  

des pièces spécifiées par l’usine. Ces pièces conviendront et fonctionneront bien parce qu’elles sont fabriquées selon  

les mêmes spécifications précises utilisées pour construire chaque nouvel appareil AMANA

®

.

Pour trouver des pièces de rechange FSP

®

 ou des accessoires, visiter le www.amanacanada.ca.

Des questions? Composer le numéro sans frais

 

1-866-587-2002.              

Pour plus d’assistance

Vous pouvez nous soumettre toute question ou toute 

problème en écrivant à l’adresse ci-dessous :

Amana Brand Appliances 

Centre pour l’eXpérience de la clientèle 

Unit 200-6750 Century Ave 

Mississauga, Ontario L5N 0B7 

1-866-587-2002

Dans votre correspondance, veuillez indiquer un numéro  

de téléphone où nous pouvons vous joindre dans la journée.

Nos consultants fournissent  

l’assistance pour :

 

Procédés d’utilisation et d’entretien.

 

Vente d’accessoires et de pièces de rechange.

 

Références aux concessionnaires, compagnies de service 

de réparation et distributeurs de pièces de rechange 

locaux. Les techniciens de service désignés par Whirlpool 

sont formés pour remplir la garantie des produits et fournir 

un service après la garantie, partout au Canada.

Summary of Contents for NTC3500FW0



























Reviews: